custom sheet metal cnc hydraulic press brake for sale
Stainless Plate Bending
any port in the world
30 ton~1000 ton
Packaging & Delivery
Standard Export Package or as customers' requirements
custom sheet metal cnc hydraulic press brake for sale
shipped in 30 days after reveiced the deposit
A press brake is a machine tool for bending sheet and plate material, most commonly sheet metal. It forms predetermined bends by clamping the workpiece between a matching punch and die.
A brake can be described by basic parameters, such as the force or tonnage and the working length.Additional parameters include the stroke length, the distance between the frame uprights or side housings, distance to the back gauge, and work height. The upper beam usually operates at a speed ranging from 1 to 15 mm/s.
Air Bending Tonnage Chart
data has been calculated based upon bending material with a tensile strength ofδb=420MPa over a length of 1m.
The internal radius R corresponds to approximate 16% of the die opening V
L= Working Length
Recommended die opening V for air bending
Material thickness S
Die opening V
6 × t
8 × t
10 × t
12 × t
Bending force F for
Determination of the bending force F for air bending (approximation)
F(chart)= 65 × S2 L/ V (Ton)
Product Feature: 1.Standard two axis(Y-X) 2.Machine welded structure, with good rigidity and stability 3.Adopt mechanical torque synchronization 4.Distance of back gauge, upper slider, electrically adjustable and digital display 5.Use front material supporting frame, work table has T block before and after processing, easy to move around of different workpiece during bending 6.Upper mold can be segmented according to customer requirements,machine with standard upper and lower molds, 7.Tooling heat treatment(Annealing, normalizing, quenching and tempering) process, increase Die mild and toughness, Increase service life 8.Upper mold adopt deflection compensation, ensure the working accuracy 9.Front and back safety guards
Standard Configuration: 1.Control system- E21 from Estun 2.Seals, dust ring-Japanese NOK 3.Hydraulic valves-Rexroth 4.Low noise gear pump- Sunny from U.S.A 5.Main Electrical part- Schneider 6.Limit switch-Schneider
Press Brake Tooling:
Advantage of our CNC press brake: 1)Press brake working precision : +-0.5° 2)Press brake holding time: 0.2 seconds 3)Running speed fast : For example,100T press brake slider down ,100mm/s ,compare to others: 60mm/s 4)Back gauge and stroke adjustment speed fast :250mm/s 5)Low noise :70 decibel (we adopt imported coupling
Packaging & Shipping
Inside Packing: with three layers waterproof plastic film Outside Packing: standard export wooden case
100% Satisfaction Guarantee.
1. 24 hours online service; 2. Three years warranty, repair and service for the whole life. 3. Question report will be replied in 48 hours. 4. Quality guaranteed.
Axis on Press Brake
HOW TO CHOOSE CONTROL SYSTEM OR HOW MANY AXIS YOU SHOULD HAVE ?
Once the customer determines the material that they will be bending, the next step in picking the right brake is to look at the number of axes they will want to control (with or without CNC), from the Y-axis (usually available as separate Y1 and Y2 axes) to things like crowning and even sheet following systems, each of which can be considered an axis.
Most customers will probably want to measure their flange length as they bend, so they will want an X-axis back gauge in order to do that. When the inserted material touches the back gauge they know they are at their correct point to bend.
The customer also needs to determine if they are going to be making multiple bends, such as putting a 45° bend into a piece of material and then making another bend further into that same piece. If that’s the case, they will need an R-axis in order to raise the back gauge up and down. They would also need to decide if they want a manual R-axis or a powered R-axis.
Next they need to consider whether or not they will be running small parts on their press brake. For example, if the customer is going to be alternating between 500mm and 3000mm wide pieces, they may want powered Z1 and Z2 fingers so they won’t have to keep manually adjusting the width of the fingers for each different bend.
The customer also needs to see if they will be bending on an angle — for example, if they are bending a flange that is 900mm deep on one side and 600mm on the other side. If that is the case, then they will want a Z-Prime axis (also known as a Delta X-axis) so that they can adjust their press brake on an angle with one fixed finger and a second one that can go plus or minus 300mm. They may also want to consider separate Z1 and Z2 axes to accomplish the same thing.
Crowning must also be considered. Will the customer be bending anything heavy enough that they will need to worry about crown? Most shops will at least occasionally have jobs big enough that crowning will be an issue, so does the customer want to be able to adjust crowning on their bed to compensate for it? If so, do they want manual crowning or CNC crowning? With manual crowning you have a handle on the side of your brake that you adjust by hand and you have to know per job what the crown will be for that material, that width, that length and that thickness. With CNC crowning the control figures all that out for you and adjusts the crown on your press brake accordingly.
Different CNC controller
The History of MaoFeng Heavy Machinery Co.,Ltd
In 2000 Tao Family rigistered MF Machinery Company in No.130-132 Des Voeux Road Central, Hong Kong, China.(Tel:+8615155356692 Site:www.mfmachinery.com)
In 2003 Indonesia agency opened in Jarkata (Tel:0821 36298118), Surabaya, Bandung, Medan, Semarang, Solo.
In 2006 Tao Brothersstarted a factory in Maanshan City Bowang Industrial Park in Anhui province of China.
In 2008 MF passed the ISO 9001:2008 quality management system standard.
in 2011 MF obtained CE certificate.
In 2017 MF Machinery has joined the Bowang government project to be part of Meta Fabrication Machine Tool Industrial Chain.
At present, the company had expanded to cover an area of 30,000 square meters and has building area up to 18,000 square meters.
1.Are you factory or trading company? We are factory but also do trading.
2.What shall we do if don't know how to operate your machine after bought from you? We have detailed installation and operation manual. Telephone and online support available 24 hours a day.
3.What are your payment terms? We support T/T, L/C, Western Union and so on.